Welcome at our official site
“ Ukrbudmash Ltd”
Our plant
develops, manufactures and sells various
industrial equipment for different branches of
industry.
Ukrbudmash Ltd in Poltava offers you mutually beneficial
cooperation in the area of acquiring and
operating various industrial equipment produced
by our company.
Our priority work destination
is manufacturing stations as follows:
Mobile oil
purification station SMM is designed for thermal
vacuum processing of transformer, cable,
turbine, machinery and other oils to remove
gas, water and solids. It also
removes acidity and vaccuumizes a transformer.
It is used while
mounting, repairing and operating gas-tight
oil-filled high-voltage equipment as well as
not hermetically sealed one with voltage up to
1150 kV inclusive ( power transformers,
high-voltage switches) which are used to
dehydrate and regenerate transformer oil)
-
biodisiel units and
systems of
BioDieselMach ®"
trade mark
is the new generation
equipment to produce biodiesel where certified
and licensed hydrodynamic technology is used.
BIODIESEL is a methyl
(ethyl)
ether procured of vegetable oil through the
process of etherification: methanol
(ethanol) is
added to the oil in proportion 1:9
and processed with a small
amount of alkaline or acid catalist in a reactor
(hydrodynamic mixer and compounded pump).
Oil generation unit SMM(P)
is designed for a total regeneration of
transformer oil with adsorbent.
Oil regeneration station SMM
(P) – 0,7
Bitumen emulsion system UVB – 14 is designed to
prepare emulsion, mixtures for road construction
and road repairs, it is used:
-
to
prepare old road base for asphalt-concrete;
-
to
prepare cold asphalt-concrete mixtures;
-
for
surface treatment of roads;
-
for
patch road repairs;
-
to
ensure water-tightness of buildings as well as
for soft roofs.
Bitumen emulsion plant UVB
-14( BEP-1)
Model (latex) polymer scheme
in the station.
“Ukrbudmash” completes bitumen-emulsion unit UVB -14
with a latex block.
Piping system allows for
latex circulation without thickening and
three-way valve suitches from circulation to
serving into station.
Latex is fed to the station
through a nozzle after preliminary mixture with finished emulsion afterwards
it gets to the mill where definite mixture takes
place. The mill serves finished modified
emulsion into the storage or motor tar sprayer.
After process finished the block is washed out
with water.
Liquid blending system USB
is designed for mixing (blending) and dissovling
liquids in the flow including vegetative
additions, it blends 2 to 5 separate components,
particularly low-octane gasoline with high
level oxygen additions, biodiesel with diesel
oil and additives.
The station can be used at
oil-refining and food industry enterprises and
filling stations.
Special features of the
above-given station are in octane number raising
by means of injection method and ultrasonic
blending system. That allows to avoid the break
down of derived product within 180 days.
- Vacuum oil adding system UVD-4 is designed to
fill up high-voltage oil hermetic inputs with
gas-free transformer oil while repairing,
mounting and operating power transformers.
- Oil adding system
UVD-4М
- Sorbent reversible cartridges
CP-260
are designed to dry transformer oil up with
zeolit.
- Sorbent catridges
CP-260
- dryer
box is designed to dry sorbent (discoloring
clay) used in transformer oil regeneration
stations.
-
Oil-heater
Injection saturator model
SI,
SID,
SID(М)
is designed to
blend water with carbon dioxide; saturators can
be used at food industry enterprises specialized
in producing mineral and table fizzy waters as
well as various sweet and low alcohol drinks.
Saturators SI-6000
are designed to saturate water with carbon
dioxide and feed it next on to a filling line.
Saturators –
SID-6000
are to saturate
preliminary deaerated water with carbon dioxide
to reduce the maintenance of gases (air) and
improve CO2 solution.
Saturator substations
SIDM-6000
are to produce various
single and multi-component drinks with
preliminary degassing of entry water.
All the saturators are fitted
with electrical control system that allows to
use a manual mode of operation as well as a
continuous automatic one.
In addition to our own
production we can offer you a large range of
machinery equipment by other producers at
reasonable price:
-various high-voltage
power-producing equipment: power transformers
with their components parts, complex transformer
substations etc.
- we perform updating,
repairing and adapting of imported units to
produce bitumen emulsions and post-guarantee
service.
- we develop receipt of
bitumen emulsions using your bitumen for your
bitumen units.
Provided
you take interest in our information we will be
glad to welcome you as our prospective partners
