Welcome at our official site
“ Ukrbudmash Plant Ltd”
Stream oil-heater
PPМ-70
This document contains protected copyright
information.All
the rights are reserved. Any part of this manual
can not be copied by any of mechanical,
electronic or other means without prior
Manufacturer’s permission.
*Due
to continuous improvement of the plant, certain
parts may differ from the default specification.
1.
APPLICATION
Stream oil-heater PPM-70 is
designed to heat transformer oil while filling
up, replacing or drying transformers. The unit
is also designed to heat mineral, machinery,
turbine and other oils as well as liquids that
do not initiate corrosion of metals a heater is
made of. The unit is used at enterprises that
repair and service transformer units, power
stations and other oil servicing. The unit is
designed to be operated indoors as well as
outdoors under a shelter.
The unit can be used at
enterprises repairing and servicing transformer
stations, at power stations and other oil
companies. It is designed to be operated indoors
as well as outdoors.
The machine complies with number 4 category
placement and climatic design UHL as per GOST
15150-69.
SPECIFICATIONS
2.1Primary
specifications are stated in the table
1.
Таble
1
|
№ |
Parameter |
Value |
|
1 |
Throughput performance under
pressure in discharge
0,2МPа,
m3/h,
max |
4,5 |
|
2 |
Fluid pressure,
МPа,
max |
0,6 |
|
3 |
Set power consumption,
KW |
72 |
|
4 |
Power circuit voltage
~
50
Hz,
V |
380 |
|
5 |
Operating conditions quantity
I
,
kW
II
,
kW
III
,
kW
IV
,
kW |
4
18
36
54
72 |
|
6 |
Heating temperature
0С |
120 |
|
7 |
Dimensions mm
-
length
-
width
-
height |
1650
750
1450 |
|
8 |
Маss,
kg |
350 |
3.
SET OF DELIVERY
Тable
2
|
№ |
Designation |
Quantity |
|
1 |
Stream oil-heater PPМ-70
ready-fitted |
1 |
|
2 |
Spare parts:
-
ТЕN
250
А
13/3,0-Р/О;
-
gasket UN-75.01.003-02 |
5
10 |
|
3 |
Operational documentation:
-
certificate with operating manual,
PPМ-70
;
-
certificate with operating manual,
rotameter
2ТRМ-1BShch2ТSR |
1
1 |
