|

Welcome
at our official site “ Ukrbudmash Plant Ltd”
Mobile oil purification station
SMM-0,16
This document contains protected
copyright information. All the rights are reserved.
Any part of this manual can not be copied by any of
mechanical, electronic or other means without prior
Manufacturer’s written permission.
Due to continuous improvement of
the plant, certain parts may differ from the default
specification. This will not reduce performance of
the system.
1. Application
Mobile oil purification station
SMM-0,16 is designed
for thermal vacuum degassing of lubrication and
insulating oils, whose viscosity at temperature 50 C
does not exceed 70 cSt to remove solids, water and
gases.
Station is used for mounting,
repairing and operating high-voltage oil equipment
with voltage up to 1150 kV( power transformers,
high-voltage switches etc.)
The machine complies with number
4 category placement and climatic design UHL as per
GOST 15 150-69.
Operating conditions:
-ambient temperature 283 to 308
K( +10 to+ 35)C;
-atmospheric pressure 84 to 106,7
kPa ( 630 to 800 mm.Hg);
- altitude above sea level 2000
m.;
- ex-proof premises.
2. Specifications
2.1 PRIMARY STATION
SPECIFICATIONS ARE STATED IN THE TABLE
1.
Тable
1
|
№ |
Parameter |
Value |
|
1 |
Capacity,
m3/h:
-
in degassing, drying and filtration
conditions |
0,16 |
|
2 |
Maximum oil outlet temperature under
heating,
°С |
60 |
|
3 |
Processed oil characteristics
(initial
moisture content
50
g/t)
-
mass moisture content,
g/t
-
filtration fineness,
mcm |
10,0
5 |
|
4 |
Oil feeding height referring to outlet
fitting,
m |
20 |
|
5 |
Oil heater power,
kW |
4,8 |
|
6 |
Oil heater specific surface power,
kW/сm2
|
1,1 |
|
7 |
Set power consumtion,
kW |
5,8 |
|
8 |
Three-phase VAC~50 Hz,V |
220/380 |
|
9 |
Dimensions, mm
-
length
-
width
-
height |
980
650
1550 |
|
10 |
Mass, kg |
230 |
3. Set of delivery
Table
2
|
№
|
Designation |
Quantity |
|
1 |
Mobile oil purification station SMM
ready-fitted |
1 |
|
2 |
SMM spare parts:
-
rubber crosspiece drawing.
SMM-20.00.03А
- filtering element 5 mcm
- filtering element 40 mcm
- filter
-
heating element
ТEN
|
1
1
1
3
1 |
|
3 |
Operational documentation:
-
SMM-0,16 certificate with operational manual |
1
|
|