Welcome at our official site “ Ukrbudmash Plant Ltd”

Gasoline blending system USB-18/5

Ethanol Bio Fuel Blending USB-18/5

Diesel Bio Fuel Blending USB-18/5

This document contains protected copyright information.All the rights are reserved. Any part of this manual can not be copied by any of mechanical, electronic or other means without prior Manufacturer’s written permission.

*Due to continuous improvement of the plant, certain parts may differ from the default specification. This will not reduce performance of the system.

1. APPLICATION

 Liquid blending system USB-18/5 type is designed to blend up two to five separate liquid components, particularly low-bracket gasoline with additives, to prepare multi-component blending motor fuel including vegetable additives.

The system can be used at enterprises of oil-refining and food industry likewise at petrol stations.

It is designed to be operated indoors as well as outdoors under a shelter.

The machine design ensures safe operating inside the high insecurity premises as per GOST 12.1.013-78.

System design allows operating at new enterprises under construction as well as at operating ones..

Modern hydrodynamic (stream) blending plants have shown themselves in industrial operation as economic, accurate and steady means for high-quality motor fuel production with optimal prime cost. In comparison with existing technology of components blending at blending vessels, reached economy and increasing of production profitability can force investment return up to 60 % for a year and provide project payback for one year or less.

HYDRODYNAMIC BLENDER

Blending process is used in hydraulic blender. This process allows supplying of all components simultaneously according to the set formula to batching collector. Through the collector finished product is delivered to storage vessel. The advantage of such technology is in the following: each component dosing accurate control, substantial reduction of batching process duration, no need in batching vessels for finished product homogenization. In the course of blending process at stream mixer the consumption of each component are permanently controlled for the purpose of providing finished product outlet with steady quality parameters, set with the formulas.  Finished product, received from stream mixer, has homogenizing structure and component content in accurate compliance to set formulas.

Expected economic parameters growth

According to our experience, using of one hydrodynamic blending plant for gasoline production can bring НПЗ 3-5 millions USD in a year due to economy, while annual gasoline production is about one million tonns.

Inventory amount reduction

Substantial reduction of blending cycle duration and steady outlet of finished product (no need in second batching) allow to speak about inventory amount balance reduction.

Tank reserve operation rate decreasing

Proposed technology provide tank reserve operation rate decreasing with the help of reduction of storage vessels due to technology process speeding up. With the help of traditional blending method in lots, production of one batch takes more than 40 hours in average. The same quantity of finished gasoline can be produced for less than 11 hours, using hydrodynamic blending plant.  All these can provide economy of 1-2 million USD due to refusal of building new storage vessels.

Production profitability risen, optimal component usage

Production optimization system under condition «out of the real time» allows reaching optimal usage of components, availavle on НПЗ, having risen low-prime cost component portion in formulas of blending process, and also balance raw material inventory and their consumption for wide range of blending operations. According to our experience typical economy can come to 0,25–1,12 USD for one thousand litres of produced gasoline. (The economy is from 150 up to 480 USD per shift).

labour outlay and operating personnel reduction

Using of hydrodynamic blending plants and automation system help to reduce batching process duration and the quantity of the personnel, involved in batching process and laboratory analysis making. Tank reserve automation maintenance allows refusing big quantity of operators, necessary for valve-frame and pumps manual maintenance. At the expense of this expected economy can come to 500 thousand USD.

OTHER ADVANTAGES

·         Capacity increasing;

·         Efficient and optimal usage of equipment;

·         Blending process automation;

·         Reduction to minimum the influence of changes in the process of raw material recycling at technological units НПЗ on the quality of finished product, received at blending plants;

·         Reduction to minimum transport dead time while finished product shipping;

·         Product level control at the vessels helps to use their vessels at most rate;

·         Blending process planning improvement;

·         Reduction of labor trade, professional development of the personnel and increasing professional interest.

 

 2. SPECIFICATIONS

Таble 1

 *Stated specifications are right for the one working flowmeter

3. SET OF DELIVERY

 3.1 Set of delivery complies with the units stated in the table 2.

Тable 2

 Note. Other pumps with similar specifications can be used.