Vacuum oil adding system UVD type
This document contains protected copyright
information.All
the rights are reserved. Any part of this manual
can not be copied by any of mechanical,
electronic or other means without prior
Manufacturer’s permission.
*Due
to continuous improvement of the plant, certain
parts may differ from the default specification.
1.APPLICATION
Vacuum oil adding system UVD type
is designed for preparing
(degassing), keeping, transporting and filling
high-voltage inputs of transformers, switches
with transformer oil. It is used at power
stations, substations and other energy
companies.
The machine complies with
number 4 category placement and climatic design
UHL as per GOST 15 150.
Specifications:
-ambient temperature +10 to+
35C;
-atmospheric pressure 630 to
800 mm.Hg
2.SPECIFICATIONS.
2.1.
Primary specifications are stated in the table
1.
Таble
1
|
№ |
Parameter |
Value |
|
1
2
3
4
5
6
7
8
|
Prepared oil quantity,
dm3
Oil quantity in filling-up block,
dm3
Residual
pressure in degassing block,
Pа
Input oil pressure,
МPa
Установленная мощность, кW
Three-phase VAC ~
50
Hz,
V
Маss
(without
oil),
kg
Dimensions,
mm
-
length
-
width
-
height |
30
4
6,7 (5х10-2)
до…0,4 (до…4)
0,25
220
80
1100
770
1200 |
